DIN 732. 2010. Wälzlager - Thermisch zulässige Betriebsdrehzahl - Berechnung und Beiwerte. s.l. : DIN, 2010.
DIN 743-1. Dezember 2012. Tragfähigkeitsberechnung von Wellen und Achsen - Grundlagen. s.l. : DIN, Dezember 2012.
DIN 743-2. Dezember 2012. Tragfähigkeitsberechnung von Wellen und Achsen - Formzahlen und Kerbwirkungszahlen. s.l. : DIN, Dezember 2012.
DIN 743-3. Juli 2024. Tragfähigkeitsberechnung von Wellen und Achsen - Werkstoffe-Festigkeitswerte. s.l. : DIN, Juli 2024.
DIN 743-4. Dezember 2012. Tragfähigkeitsberechnung von Wellen und Achsen - Schädigungsäquivalente Spannungsamplitude. s.l. : DIN, Dezember 2012.
DIN 3967. 1978. Getriebe-Paßsystem; Flankenspiel, Zahndickenabmaße, Zahndickentoleranzen, Grundlagen. DIN, August 1978.
DIN 3975-1. 2017. Begriffe und Bestimmungsgrößen für Zylinder-Schneckengetriebe mit sich rechtwinklig kreuzenden Achsen - Teil 1: Schnecke und Schneckenrad. DIN, September 2017.
DIN 7190-1. 2017. Pressverbände - Teil 1: Berechnungsgrundlagen und Gestaltungsregeln für zylindrische Pressverbände. 2017.
ISO 76. 2006. Rolling bearings - Static load ratings. s.l. : ISO, 2006.
ISO 281. 2007. Rolling bearings - Dynamic load ratings and rating life. 2007.
ISO 286-1. 2010. ISO code system for tolerances of linear sizes - Basis of tolerances, deviations and fits. 2010.
ISO 1002. 1983. Rolling Bearings - Airframe bearings - Characteristics, boundary dimensions, tolerances, static load ratings. 1983.
ISO/TR 1281-1. 2021. Rolling bearings - Explanatory notes on ISO 281 - Part 1: Basic dynamic load rating and basic rating life. s.l. : ISO, 2021.
ISO/TR 1281-2. 2008. Rolling bearings - Explanatory notes on ISO 281 - Part 2: Modified rating life calculation, based on a systems approach to fatigue stresses. s.l. : ISO, 2008.
ISO 3408-5. 2006. Static and dynamic axial load ratings and operational life. s.l. : ISO, 2006.
ISO 5753. 2009. Rolling bearings - Internal clearance - Part 1: Radial internal clearance for radial bearings.2009.
ISO 6336-1. November 2019. Calculation of load capacity of spur and helical gears — Part 1: Basic principles, introduction and general influence factors.2019.
ISO 6336-2. November 2019. Calculation of load capacity of spur and helical gears — Part 2: Calculation of surface durability (pitting).2019.
ISO 6336-3. November 2019. Calculation of load capacity of spur and helical gears — Part 3: Calculation of tooth bending strength.2019.
ISO 6336-5. August 2016. Calculation of load capacity of spur and helical gears — Part 5: Strength and quality of materials.2016.
ISO 6336-6. November 2019. Calculation of load capacity of spur and helical gears — Part 6: Calculation of service life under variable load.2019.
ISO/TR 6336-30. December 2022. Calculation of load capacity of spur and helical gears — Part 30: Calculation examples for the application of ISO 6336 parts 1,2,3,5.2022.
ISO 7902-1. June 2020. Hydrodynamic plain journal bearings under steady-state conditions - Calculation procedure - Third edition. s.l. : ISO, June 2020.
ISO 7902-2. June 2020. Hydrodynamic plain journal bearings under steady-state conditions - Functions used in the calculation procedure - Second edition. s.l. : ISO, June 2020.
ISO 7902-3. June 2020. Hydrodynamic plain journal bearings under steady-state conditions - Permissible operational parameters - Second edition. s.l. : ISO, June 2020.
ISO/TR 10657. 2021. Explanatory notes on ISO 76. s.l. : ISO, 2021.
ISO 15312. 2003. Rolling bearings - Thermal speed rating - Calculation and coefficients. 2003.
ISO 16281. 2025. Rolling Bearings - Methods for calculating the modified reference rating life for universally loaded rolling bearings. s.l. : ISO, 2025.
ISO 17956. 2025. Rolling Bearings - Method for calculating the effective static safety factor for universally loaded rolling bearings. s.l. : ISO, 2025.
ISO 20056-1. 2017. Rolling bearings - Load ratings for hybrid bearings will rolling elements made of ceramic - Part 1: Dynamic load ratings. 2016.
ISO 20056-2. 2017. Rolling bearings - Load ratings for hybrid bearings will rolling elements made of ceramic - Part 2: Static load ratings. 2017.
ISO 21771-1. 2024 Cylindrical involute gears and gear pairs - Part 1: Concepts and Geometry. s.l. : ISO, October 2024.
AGMA 925. 2003. Effect of Lubrication on Gear Surface Distress. 2003.
Baalmann, K. 1994. Gleichung für die Sollviskosität nach DIN ISO 281. Tribologie und Schmierungstechnik. 1994.
Baly, Hatem. 2005. Reibung fettgeschmierter Wälzlager. Hannover : Universität Hannover, 2005.
Barnsby, Roger. 2003. Life ratings for modern rolling bearings. NewYork : ASME International, 2003.
Boresi, Arthur P. and Schmidt, Richard J. 2005. Advanced Mechanics of materials. s.l. : John Wiley&Sons, 2005.
Correns, Martin. 2015. Berechnung der Ermüdungslebensdauer von Wälzkörpern. 11. VDI Fachtagung Gleit- und Wälzlagerungen. 2015.
de Mul, J. M., Kalker, J. J. and Fredrikson, B. 1986. The ContactBetween Arbitrary Curved Bodies of Finite Dimensions. Journal of Tribology. 1986, Vol. 108.
Fujiwara, Hiroki and Yamauchi, Kazuto. 2010. Tolerance Design of Logarithmic Roller Profiles in Cylindrical Roller Bearings. Journal of Advanced Mechanical Design, Systems, and Manufacturing. 4, 2010, Vol. 4.
Frantz, P. P. and Leveille. 2001. An Approach to Predicting the Treshold of Damage to an Anular Contact Bearing During Truncation. Aerospace Report No. TR-2001(8565)-4 March, 2001
Gohar, Ramsey. 2001. Elastohydrodynamics. London : Imperial College Press, 2001.
Harnoy, Avraham. 2003. Bearing Design in Machinery. New York, Basel : Marcel Dekker, 2003.
Harris, T., Rumbarger, J. H. and Butterfield, C. P. 2009. Wind Turbine Design Guideline DG03: Yaw and Pitch Rolling Bearing Life. Golden, Colorado : National Renewable Energy Laboratory, 2009.
Harris, Tedric A. and Kotzalas, Michael N. 2007. Rolling Bearing Analysis: Advanced Concepts of Bearing Technology. s.l. : CRC Press, 2007.
Harris, Tedric A. and Kotzalas, Michael N. 2007. Rolling Bearing Analysis: Essential Concepts of Bearing Technology. CRC Press : s.n., 2007.
Heemskerk, R. 1980. EHD lubrication in rolling bearings, review of theory and influence on fatigue life. TRIBOLOGIA E LUBRICATIONE. 1980.
Houpert, L. 1999. Bearing Life Calculation in Oscillatory Applications. Tribology Transactions. 1999, Bd. 42.
Koch, Asmus. 1996. Steigerung der Höchstdrehzahl von Schrägkugellagern bei Ölminimalmengenschmierung. Aachen : Shaker Verlag, 1996.
Nakajima, Katsuhiko. 1995. Thermal Contact Resistance Between Balls and Rings of a Bearing Under Axial, Radial, and Combined Loads. Journal of Thermophysics and Hear Transfer. 9, 1995, Bd. 1.
Niemann, G. und Winter, H. 2003. Maschinenelemente Band 2: Getriebe allgemein, Zahnradgetriebe - Grundlagen, Stirnradgetriebe. Heidelberg : Springer, 2003.
—. 2004. Maschinenelemente Band 3: Schraubrad-, Kegelrad-, Schnecken-, Ketten-, Riemen-, Reibradgetriebe, Kupplungen, Bremsen, Freiläufe. Heidelberg : Springer, 2004.
Niemann, G., Winter, H. und Höhn, B.-R. 2005. Maschinenelemente Band 1: Konstruktion und Berechnung von Verbindungen, Lagern, Wellen. Heidelberg : Springer, 2005.
Paland, E.-G. 1968. Die Lastverteilung in einem auf der Ebene abgestützten Zylinderrollenlager. Maschinenbautechnik (Schmierungstechnik). 17, 1968, Bd. 8.
Schlecht, Berthold. 2007. Maschinenelemente 1. München : Pearson Studium, 2007.
—. 2010. Maschinenelemente 2. München : Pearson Studium, 2010.
Teutsch, Roman and Sauer, Bernd. 2004. An Alternative Slicing Technique to Consider Pressure Concentrations in Non-Hertzian Line Contacts. Journal of Tribology. 2004, Vol. 126.
Cowper., G. R. June 1966. The Shear Coefficient in Timoshenko’s Beam Theory. Journal of Applied Mechanics – Transactions of the ASME. June 1966.
Hutchinson, J. R. January 2001. Shear Coefficients for Timoshenko Beam Theory. Journal of Applied Mechanics – Transactions of the ASME. January 2001.
